CAT 116-6680 2-Pin Magnetic Speed Sensor M16. Low-output magnetic rotational speed sensor for selected Caterpillar applications. Public CAT specifications and compatible-model examples are listed below; confirm fitment by serial number. Contact RUIPO for stock status and international quotation.
CAT 116-6680 2-Pin Magnetic Speed Sensor M16 يتم تحديدها برقم قطعة الغيار الخاص بشركة كاتربيلر 116-6680. Detects rotational movement and provides a speed-related electrical signal to the equipment control/monitoring system. Caterpillar identifies this unit as a low-output, two-pin magnetic sensor with a DT06-style connector; connector and thread specifications are central to correct selection. This listing is intended for engineers, fleet maintenance teams and international B2B parts buyers who need a clear product specification and a defensible method of checking the application before ordering.
Detects rotational movement and provides a speed-related electrical signal to the equipment control/monitoring system. Caterpillar identifies this unit as a low-output, two-pin magnetic sensor with a DT06-style connector; connector and thread specifications are central to correct selection.
A speed sensor is part of a sensing circuit that also includes the rotating target, air gap, harness, controller and signal processing. A fault code by itself does not prove the sensor is defective.
| المواصفات | التفاصيل |
|---|---|
| Brand / part identification | Caterpillar / 116-6680 |
| Part number without hyphen | 1166680 |
| Product type | Low-output magnetic rotational speed sensor |
| رقم الجزء | 116-6680 |
| Sensor type | Low-output magnetic speed sensor |
| الموصل | 2-pin DT06 type |
| External thread | M16 × 1.5 |
| CAT-listed cable length | 5.91 in |
| CAT-listed overall length | 3.26 in |
| المواد | Stainless steel |
Technical data above is limited to publicly verifiable CAT product information. Unlisted dimensions, pressure ratings, torque values and electrical characteristics are not assumed. Please verify the current official drawing and applicable serial number before installation.
| Equipment Type | CAT Models / Applications |
|---|---|
| Vibratory Compactors | CB-434D, CB-534D, CB-564D |
| Wheel Loaders | 924G, 924GZ |
| Wheeled Excavators | M312, M315 |
| Generator Sets | C3.3, C4.4, C6.6, C7.1 |
Fitment guidance: Model numbers are representative applications from the Caterpillar public product listing, not a guarantee for every production year or serial number. Engine and machine configurations vary, so final compatibility must be checked in CAT SIS or with the relevant parts diagram before shipment.
Do not replace a component based on one symptom alone. Inspection should include the adjacent parts, installation condition and available equipment diagnostics so that a new part is not installed into an unresolved system fault.
Electrical connector shape, thread size, mounting depth and signal characteristics should be checked together. Do not force a sensor or alter the harness to make an incorrect part fit. Use the applicable Caterpillar service manual for torque figures, clearance settings, calibration instructions and safe test procedures; those values can differ between engine arrangements.
For other components used in related engine or maintenance systems, review these RUIPO product listings. They are cross-references for sourcing and are not a claim of direct interchangeability:
Detects rotational movement and provides a speed-related electrical signal to the equipment control/monitoring system. Caterpillar identifies this unit as a low-output, two-pin magnetic sensor with a DT06-style connector; connector and thread specifications are central to correct selection.
Public Caterpillar parts data lists selected examples including Vibratory Compactors: CB-434D, CB-534D, CB-564D; Wheel Loaders: 924G, 924GZ; Wheeled Excavators: M312, M315. This is an application guide only; confirm compatibility by serial number and engine arrangement.
Please confirm the original CAT part number, equipment/engine model, serial number, correct mounting arrangement and quantity. For repair jobs, ask whether related seals or hardware are required.
RUIPO Spare Parts can review the part number and your equipment information, check current stock and available packaging, and prepare a quotation with shipping details. Product availability is not guaranteed until confirmed.
Request a quote: Contact RUIPO Spare Parts with the CAT part number, required quantity, destination country and serial-number information. We can check the details before an export quotation is issued.