CAT 349-6530 24V Electric Starter Motor 6612 RPM. 24-volt electric starting motor for selected Caterpillar applications. Public CAT specifications and compatible-model examples are listed below; confirm fitment by serial number. Contact RUIPO for stock status and international quotation.
CAT 349-6530 24V Electric Starter Motor 6612 RPM wird anhand der Caterpillar-Teilenummer identifiziert 349-6530. Provides the mechanical cranking force needed to bring a compatible Caterpillar engine up to starting speed. The 24-volt specification distinguishes this unit from other starting-system configurations; gear, nose, solenoid and mounting details still need to match the application. This listing is intended for engineers, fleet maintenance teams and international B2B parts buyers who need a clear product specification and a defensible method of checking the application before ordering.
Provides the mechanical cranking force needed to bring a compatible Caterpillar engine up to starting speed. The 24-volt specification distinguishes this unit from other starting-system configurations; gear, nose, solenoid and mounting details still need to match the application.
Electrical equipment must be evaluated within its complete circuit. An otherwise correct part may fail to operate with the wrong supply, mounting, control signal or cable connection.
| Spezifikation | Einzelheiten |
|---|---|
| Brand / part identification | Caterpillar / 349-6530 |
| Part number without hyphen | 3496530 |
| Product type | 24-volt electric starting motor |
| Teilnummer | 349-6530 |
| CAT name | 24 Volt Electric Starting Motor |
| Spannung | 24 V |
| CAT-listed RPM | 6612 |
| Nominal current | 100 A (CAT listing) |
| Nose housing | SAE No. 3 (CAT listing) |
| Marine approved | Ja |
Technical data above is limited to publicly verifiable CAT product information. Unlisted dimensions, pressure ratings, torque values and electrical characteristics are not assumed. Please verify the current official drawing and applicable serial number before installation.
| Equipment Type | CAT Models / Applications |
|---|---|
| Generator Sets | C18, C32, C175-16, 3516E |
| Marine Engines | C32 |
| Excavators | 349E, 349F, 352F |
| Track-Type Tractors | D6T, D8T, D10T2 |
Fitment guidance: Model numbers are representative applications from the Caterpillar public product listing, not a guarantee for every production year or serial number. Engine and machine configurations vary, so final compatibility must be checked in CAT SIS or with the relevant parts diagram before shipment.
Do not replace a component based on one symptom alone. Inspection should include the adjacent parts, installation condition and available equipment diagnostics so that a new part is not installed into an unresolved system fault.
Electrical isolation and verification of the wiring diagram should come before removal. Do not energize a component until the published ratings and installed configuration have been confirmed. Use the applicable Caterpillar service manual for torque figures, clearance settings, calibration instructions and safe test procedures; those values can differ between engine arrangements.
For other components used in related engine or maintenance systems, review these RUIPO product listings. They are cross-references for sourcing and are not a claim of direct interchangeability:
Provides the mechanical cranking force needed to bring a compatible Caterpillar engine up to starting speed. The 24-volt specification distinguishes this unit from other starting-system configurations; gear, nose, solenoid and mounting details still need to match the application.
Public Caterpillar parts data lists selected examples including Generator Sets: C18, C32, C175-16, 3516E; Marine Engines: C32; Excavators: 349E, 349F, 352F. This is an application guide only; confirm compatibility by serial number and engine arrangement.
Please confirm the original CAT part number, equipment/engine model, serial number, correct mounting arrangement and quantity. For repair jobs, ask whether related seals or hardware are required.
RUIPO Spare Parts can review the part number and your equipment information, check current stock and available packaging, and prepare a quotation with shipping details. Product availability is not guaranteed until confirmed.
Request a quote: Contact RUIPO Spare Parts with the CAT part number, required quantity, destination country and serial-number information. We can check the details before an export quotation is issued.
