CAT 287-7210 Basic Turbocharger for C30 C32. Basic exhaust-driven turbocharger for selected Caterpillar applications. Public CAT specifications and compatible-model examples are listed below; confirm fitment by serial number. Contact RUIPO for stock status and international quotation.
CAT 287-7210 Basic Turbocharger for C30 C32 è identificato dal codice articolo Caterpillar 287-7210. Uses exhaust-gas energy to drive the compressor that increases intake-air mass. Caterpillar identifies this model as a basic turbocharger used mainly on C30 and C32 engine/generator applications rather than as a complete bolt-on system for every C-series engine. This listing is intended for engineers, fleet maintenance teams and international B2B parts buyers who need a clear product specification and a defensible method of checking the application before ordering.
Uses exhaust-gas energy to drive the compressor that increases intake-air mass. Caterpillar identifies this model as a basic turbocharger used mainly on C30 and C32 engine/generator applications rather than as a complete bolt-on system for every C-series engine.
Exhaust-driven charging is a system, not just one hardware item. If a compressor wheel is clean but the engine still struggles under load, check the intake filter, charge-air hoses, exhaust restriction and oil supply before assuming this component has failed. A correct physical match also depends on the engine-specific inlet and outlet interfaces.
| Specifiche | Dettagli |
|---|---|
| Brand / part identification | Caterpillar / 287-7210 |
| Part number without hyphen | 2877210 |
| Product type | Basic exhaust-driven turbocharger |
| Numero di parte | 287-7210 |
| Product type | Basic Turbocharger |
| Lunghezza | 15.9 in |
| Altezza | 14.6 in |
| Approx. weight | 69.45 lb (CAT listing) |
| Internal thread | 3/8-16-2B |
Technical data above is limited to publicly verifiable CAT product information. Unlisted dimensions, pressure ratings, torque values and electrical characteristics are not assumed. Please verify the current official drawing and applicable serial number before installation.
| Equipment Type | CAT Models / Applications |
|---|---|
| Generator Sets | C32 |
| Marine Engines | C30, C32 |
| Marine Auxiliary | C32 |
| Generators | SR5 |
Fitment guidance: Model numbers are representative applications from the Caterpillar public product listing, not a guarantee for every production year or serial number. Engine and machine configurations vary, so final compatibility must be checked in CAT SIS or with the relevant parts diagram before shipment.
Do not replace a component based on one symptom alone. Inspection should include the adjacent parts, installation condition and available equipment diagnostics so that a new part is not installed into an unresolved system fault.
Turbocharger work demands clean lubrication and contamination control. A replacement cartridge or complete turbo must be matched to the installed arrangement; mixing visually similar units can create boost, mounting or cooling problems. Use the applicable Caterpillar service manual for torque figures, clearance settings, calibration instructions and safe test procedures; those values can differ between engine arrangements.
For other components used in related engine or maintenance systems, review these RUIPO product listings. They are cross-references for sourcing and are not a claim of direct interchangeability:
Uses exhaust-gas energy to drive the compressor that increases intake-air mass. Caterpillar identifies this model as a basic turbocharger used mainly on C30 and C32 engine/generator applications rather than as a complete bolt-on system for every C-series engine.
Public Caterpillar parts data lists selected examples including Generator Sets: C32; Marine Engines: C30, C32; Marine Auxiliary: C32. This is an application guide only; confirm compatibility by serial number and engine arrangement.
Please confirm the original CAT part number, equipment/engine model, serial number, correct mounting arrangement and quantity. For repair jobs, ask whether related seals or hardware are required.
RUIPO Spare Parts can review the part number and your equipment information, check current stock and available packaging, and prepare a quotation with shipping details. Product availability is not guaranteed until confirmed.
Request a quote: Contact RUIPO Spare Parts with the CAT part number, required quantity, destination country and serial-number information. We can check the details before an export quotation is issued.
