CAT 9Y-6089 0.8mm Flywheel Housing Gasket

CAT 9Y-6089 0.8mm Flywheel Housing Gasket

CAT 9Y-6089 0.8mm Flywheel Housing Gasket определяется по артикулу Caterpillar 9Y-6089. Seals the interface between two engine housings around the flywheel end. This is a static sealing component rather than a rotating flywheel or a complete flywheel housing. The published nominal thickness helps identify the correct service part. This listing is intended for engineers, fleet maintenance teams and international B2B parts buyers who need a clear product specification and a defensible method of checking the application before ordering.

Product Overview and Function

Seals the interface between two engine housings around the flywheel end. This is a static sealing component rather than a rotating flywheel or a complete flywheel housing. The published nominal thickness helps identify the correct service part.

Even inexpensive service parts can determine whether a larger repair succeeds. Dimensions, mating geometry, material and installation sequence should be checked against the exact manufacturer drawing rather than assuming that another component with a similar appearance is interchangeable.

Key Product Features

• Official Caterpillar 0.8 mm nominal thickness
• Designed for static housing-to-housing sealing
• Public CAT listing identifies rubber-gasket material
• Used on numerous engine families and heavy machines

Технические характеристики

Technical data above is limited to publicly verifiable CAT product information. Unlisted dimensions, pressure ratings, torque values and electrical characteristics are not assumed. Please verify the current official drawing and applicable serial number before installation.

Compatible CAT Models and Applications

Fitment guidance: Model numbers are representative applications from the Caterpillar public product listing, not a guarantee for every production year or serial number. Engine and machine configurations vary, so final compatibility must be checked in CAT SIS or with the relevant parts diagram before shipment.

Common Problems and Inspection Points

• Fluid staining around the rear engine area is not automatically a gasket failure: inspect adjacent crankshaft seals, oil lines and housings first.
• A damaged gasket can permit leakage at the static flange joint or allow contamination to reach the interface.

Do not replace a component based on one symptom alone. Inspection should include the adjacent parts, installation condition and available equipment diagnostics so that a new part is not installed into an unresolved system fault.

Installation and Maintenance Notes

• Support and align mating components during removal, and use the correct service procedure for housing alignment.
• Clean mating faces without gouging them and follow the original sealant and bolt-torque instructions.

The original failure should be understood before new parts are installed. Clean sealing surfaces, correct fasteners, controlled tightening and inspection of adjacent parts are often as important as the replacement component itself. Use the applicable Caterpillar service manual for torque figures, clearance settings, calibration instructions and safe test procedures; those values can differ between engine arrangements.

Перед оформлением заказа

• Confirm part 9Y-6089 in the engine arrangement by serial number.
• Verify that the replacement is the 0.8 mm gasket, not a different housing seal.
• Please send the requested quantity, shipping destination, engine or machine serial number, and photographs of the old part or packaging if available.

Сопутствующие запчасти для CAT

For other components used in related engine or maintenance systems, review these RUIPO product listings. They are cross-references for sourcing and are not a claim of direct interchangeability:

• Водяной насос двигателя CAT 354-1672
• CAT 207-1556 Electric Starting Motor

Why Choose RUIPO Spare Parts

• CAT part-number-based sourcing for professional maintenance and procurement teams.
• Assistance checking fitment against your engine or machine model and serial number.
• International B2B quotations, packing confirmation and export-shipping coordination.
• Clear communication on stock status and documentation before an order is confirmed.

Часто задаваемые вопросы

What is the CAT 9Y-6089 part used for?

Seals the interface between two engine housings around the flywheel end. This is a static sealing component rather than a rotating flywheel or a complete flywheel housing. The published nominal thickness helps identify the correct service part.

Which Caterpillar models are compatible with 9Y-6089?

Public Caterpillar parts data lists selected examples including Industrial Engines: C9, C11, C13, C15, C18; Generator Sets: C9, C13, C15, C18, C32; Track-Type Tractors: D6T, D8T, D9T. This is an application guide only; confirm compatibility by serial number and engine arrangement.

What should be checked before purchasing?

Please confirm the original CAT part number, equipment/engine model, serial number, correct mounting arrangement and quantity. For repair jobs, ask whether related seals or hardware are required.

Can RUIPO help with international supply and part identification?

RUIPO Spare Parts can review the part number and your equipment information, check current stock and available packaging, and prepare a quotation with shipping details. Product availability is not guaranteed until confirmed.

Request a quote: Contact RUIPO Spare Parts with the CAT part number, required quantity, destination country and serial-number information. We can check the details before an export quotation is issued.